Microvella System

Reinforced

Mesh and a build coat under the finish. Built for water and wear, not just splashes.

Coming soon

The full walkthrough for this system lands before the product ships.

Watch the full system

Best for Showers & wet areas
Also for Over tile · high traffic
Layers 5 products · 9 coats

What goes on, in order

5 layers

Five products, nine coats. The mesh and build coat are what make this rated for showers — skip them and you have Core.

  1. 1

    Primer

    Two-part epoxy bond coat. 75:25 by weight.

    ×1600 – 650 sq ft

  2. 2

    Mesh

    Reinforcing layer embedded in the build coat.

    ×1

  3. 3

    Build Coat

    Levelling base that carries the mesh.

    ×2

  4. 4

    Microcement

    Coarse or Smooth finish coat.

    ×2375 / 450 sq ft

  5. 5

    Sealer

    Two-part polyurethane top coat. 83:17 by weight.

    ×2600 – 650 sq ft per coat

This is the system for showers, wet areas and anything going over tile.

Open the calculator

The other systems

One Accent walls Core Walls & floors