Microvella Microcement

Primer

Two-part epoxy · water-resistant membrane bond coat.

Coming soon

We are filming this one now. It will be here before the product ships.

Watch before you apply

Use on Walls / Floors / Wet AreasInterior / Exterior

Coverage 600 – 650 sq ft

Mix ratio 75 : 25A : B by weight

Kit 8.27 lb + 2.76 lbPart A + Part B

How to apply

5 steps

1

Prep the surface
Apply only to clean, dry, solid, smooth floors or walls. Imperfections may show through.
2

Mix Part A + B
Full container: mix Part A with Part B. Mixing less? Use the 75:25 ratio by weight — the calculator works it out. Pot life is 60 minutes.
3

Mix with a drill
Use a drill mixing tool at slow speed and blend fully. Do not undermix. Mix for 3 minutes.
4

Roll on evenly
On floors, broadcast 60–80 grit silica sand over the entire surface in small sections.
5

Let dry
Walls 60 minutes. Floors 2 hours.

Mixing less than a full kit? Weigh both parts — do not eyeball it.