Microvella Microcement

Sealer

Two-Component · Transparent Satin-Matte Polyurethane Sealer

Coming soon

We are filming this one now. It will be here before the product ships.

Watch before you apply

Use on Walls / Floors / Wet AreasInterior / Exterior
Coverage 600 – 650 sq ftper coat · apply 2 coats
Mix ratio 83 : 17A : B by weight
Kit 9.15 lb + 30 ozPart A + Part B

How to apply

5 steps

  1. 1

    Sand the surface

    Lightly sand the microcement layer before sealing.

  2. 2

    Remove all dust

    Wipe clean with a dry microfiber cloth or mop.

  3. 3

    Add all of Part B

    Full container: add the entire Part B bottle. Mixing less than the full kit? Use the 83:17 ratio — the calculator below works it out.

  4. 4

    Roll on evenly

    Even coat, no heavy areas, puddles or roller lines. Back roll in both directions.

  5. 5

    Let dry and recoat

    2 hours, then apply the second coat.

Mixing less than a full kit? Weigh both parts — do not eyeball it.

Work out your mix ratio

Where this fits

One Accent walls Core Walls & floorsSealer ×2 Reinforced Showers, wet areas, over tile & high trafficSealer ×2

Microvella Sealer

Part A and Part B, one kit.